Get product updates, special offers, event news, and tuning tips. Enter your email address:



 

Air/Fuel Ratio Display-Auto Timer

*Great solution for those only looking for a small, rectangle, true wideband air/fuel ratio display (range 7.4 to 22.4), that can be easily flush mounted anywhere to your vehicle.

The Innovate Motorsports Auto Timer is designed to prolong the life of your turbocharger and/or oil. The Innovate Motorsports Auto Timer will allow a vehicle to idle the engine for a timed period, with the ignition key removed. This conveniently allows the engine oil and turbo center cartridge to cool down properly and prolong turbo and oil life. This can be done by two programmable count down presets, or you can use its three auto timer modes (Low-Normal-High). A Manual Timer, Volt-Meter, and *Wideband Air/Fuel Ratio Display are also standard features. Using the Auto Timer to display your Wideband Air/Fuel Ratio requires one of the following Innovate Motorsports wideband controllers: LC-1, LC-2, LM-1, or LM-2 (*Not included in base Auto Timer kit, P/N: 3830). The Auto Timer Air/Fuel Ratio display range is 7.4 to 22.4, with a 0-5 volt linear input. The safety option for the parking brake can be used to disengage operation if vehicle is attempted to be moved without the key.

Dimensions: 3" W x 1 1/4" H x 1/2" D

The Auto Timer-Air/Fuel Display ($79) can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits include the Auto Timer-Air/Fuel Display, Control Unit, Wire harness, Mounting Accessories, and installation manual. P/N: 3830

The Auto Timer-Air/Fuel Display ($249) comes complete with the patented award-winning LC-2 Wideband Controller, Auto Timer-Air/Fuel Ratio Display Kit, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, LogWorks Software (Free Download), and instructions P/N: 3833

Key benefits of the “Auto Timer-Air/Fuel Ratio Display” kits include:

  • The industry’s most accurate and fastest-responding wideband controller. One additional available analog output (one connects to the gauge).Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Display itself is analog only- not serial).
  • Log directly from the LC-2’s digital output into laptop w/included software:

For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the Auto Timer Display offers an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces (starting as low as $129), and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges include the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers.

Note: The Auto Timer Display has NO serial capability, and will only display AFR in the Gasoline scale.

Installation and Setup: Installation of the Auto Timer-Air/Fuel Ratio display is relatively simple. Complete documentation is supplied, and the support pages, videos, application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products. Click here to find a dealer near you.

Home | Products | Resources | Dealers | Company | Motorsports News | Contact Us
Innovate! Technology, Inc. All Rights Reserved.