Universal Accessories

Bosch LSU 4.2 5-wire, wide-band O2 sensor. Replacement sensor for the LM-1 and LC-1.

For all other Innovate Widebands, verify which sensor is being used. The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9 but the sensor connector is different on each one. Reference the Sensor/ Sensor cable identifier image below.

Another way to verify which sensor is being used is to connect the unit to the LM Programmer software. Please reference your user manual for more details.

Mild Steel Bung & Plug Kit.

Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines.

Adapter for computers without Serial ports. This cable will convert Serial to USB. Hardware drivers included.

Windows 98 SE, ME, 2000, XP, Vista 32, Vista 64, 7 & 8 (with latest driver download)

The HBX-1 is intended to provide a degree of thermal isolation in applications where the pipe temperature exceeds 900 º F (approx. 500º C) with a heat-sinking design intended to screw into a new or existing 18mm bung.

Bung & Plug Kit

This custom cable will allow you to connect and/or daisy chain the following products: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12. Also used to connect the LM-1 to the XD-16.

Extended Bung & Plug (1 inch) Mild Steel

This Stainless Steel adapter allows you to use a full size 18mm thread O2 Sensor in a 12mm Original Equipment bung. Most Import Motorcycles, ATV's etc. come with a 12mm O2 sensor. This adapter allows you to use one of Innovate's Data loggers or Gauges without the need of welding in a new Bung. This Adapter allows mounting the O2 Sensor at a 45-degree angle. The nut allows you to point the Adapter in any direction for the greatest amount of clearance. It also (not shown) comes with a copper sealing washer.

Extended Bung & Plug (1 inch) Stainless Steel - P/N: 3838.

Bung is Stainless Steel, plug is mild steel.

The Serial Program Cable will allow you to connect the MTX series gauges, LM-2, LC-2 SCG-1, PSB-1, and PSN-1 to your PC.

Bosch LSU 4.9 5-wire, wide-band O2 sensor.

Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1.

NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the sensor connector is different for each sensor. Reference the Sensor/ Sensor cable identifier image below.

Another way to verify which sensor is being used is to connect the unit to the LM Programmer software. Please reference your user manual for more details.